3.00" to 4.00" Silicone Reducer Hose 3-Ply Red
3.00" to 4.00" Silicone Reducer Hose ā 3-Ply Red
Stepped silicone hose for smooth diameter transitions in coolant, vacuum, and boost lines. 3-ply construction handles heat and pressure spikes without collapse. Red compound resists ozone and UV degradation in engine bays.
Key Features
- 3.00" to 4.00" step - Bridges mismatched hose or fitting sizes without adapters or coupling rings
- 3-ply silicone core - Resists high-temp coolant, vacuum draw, and light boost pressure without pinching
- Red compound - Withstands prolonged UV and ozone exposure; visibility in engine bay
Specs
- Material: Silicone
- Configuration: Reducer (stepped bore)
- Ply: 3-ply reinforced
- Color: Red
What's Included
- 1x Silicone Reducer Hose (3.00" to 4.00")
Frequently Asked Questions
Do I need clamps for this hose?
Yes. Use worm-gear or spring hose clamps sized for both the 3.00" and 4.00" ends ā one at each diameter to seal properly. Clamps are sold separately.
Can I use this for boost lines on a turbo setup?
This hose handles light boost pressure, but confirm your system's PSI rating before install. For sustained high-boost applications, verify the 3-ply rating matches your turbo's spec sheet.
What's the length of this reducer?
Length not specified in the product data ā measure your application before ordering to ensure it bridges your gap. Test-fit length against your intake tract or coolant routing before final clamping.
Original: $79.99
-65%$79.99
$28.00
Description
3.00" to 4.00" Silicone Reducer Hose ā 3-Ply Red
Stepped silicone hose for smooth diameter transitions in coolant, vacuum, and boost lines. 3-ply construction handles heat and pressure spikes without collapse. Red compound resists ozone and UV degradation in engine bays.
Key Features
- 3.00" to 4.00" step - Bridges mismatched hose or fitting sizes without adapters or coupling rings
- 3-ply silicone core - Resists high-temp coolant, vacuum draw, and light boost pressure without pinching
- Red compound - Withstands prolonged UV and ozone exposure; visibility in engine bay
Specs
- Material: Silicone
- Configuration: Reducer (stepped bore)
- Ply: 3-ply reinforced
- Color: Red
What's Included
- 1x Silicone Reducer Hose (3.00" to 4.00")
Frequently Asked Questions
Do I need clamps for this hose?
Yes. Use worm-gear or spring hose clamps sized for both the 3.00" and 4.00" ends ā one at each diameter to seal properly. Clamps are sold separately.
Can I use this for boost lines on a turbo setup?
This hose handles light boost pressure, but confirm your system's PSI rating before install. For sustained high-boost applications, verify the 3-ply rating matches your turbo's spec sheet.
What's the length of this reducer?
Length not specified in the product data ā measure your application before ordering to ensure it bridges your gap. Test-fit length against your intake tract or coolant routing before final clamping.
